News & Analysis
/
Article

Model predicts bending, curling and rolling of liquid crystal elastomer beams

JUN 18, 2021
Method for numerical simulation can simulate the behavior of liquid crystal elastomer beams in a large range of thicknesses as well as different material compositions.
Model predicts bending, curling and rolling of liquid crystal elastomer beams internal name

Model predicts bending, curling and rolling of liquid crystal elastomer beams lead image

Liquid crystal elastomers (LCE) have fascinated researchers for their possible applications in soft actuators, robotics, artificial muscles and biomimetic devices. Modeling and simulation of LCE-based actuators is challenging due to the complex physical phenomena. Potekhina et al. created a simple model for simulation of behaviors of LCE beams under thermal actuation.

The researchers represent the bending and curling behaviors of the LCE beams under a thermal stimulus in a layered 2D-model based on the equivalent thermal expansion effect. The relatively simple method for numerical simulation can be implemented in commercially available software tools.

In addition, not only is the model effective in predicting the deformation of flat LCE beams with uniform thickness, it is also useful for LCE beams with non-trivial geometries, such as a beam with tapered thickness. The model is capable of simulating the behavior of LCE beams in a large range of thicknesses as well as different LCE material compositions.

“Usually, large deformations are difficult to predict with more sophisticated geometrical shapes, such as rolls, but our method is able to predict both bending and the large deformations in curling and rolling of LCE beams,” said author Alissa Potekhina. “It is also interesting to observe that the thermal response of the LCE beams of different thicknesses in the results of experimental characterization shows a similar value of coefficient of thermal expansion in the equivalent thermal expansion effect.”

Going forward, the researchers will investigate methods for fabrication of functional LCE devices, such as microgrippers, for applications in microrobotics and micromanipulation.

Source: “Numerical simulation and experimental validation of bending and curling behaviors of liquid crystal elastomer beams under thermal actuation,” by Alissa Potekhina and Changhai Wang, Applied Physics Letters (2021). The article can be accessed at https://doi.org/10.1063/5.0053302 .

Related Topics
More Science
/
Article
Higher-order interactions are often found to be detrimental to synchronization, but a new study shows that, when weak, they can work together with pairwise interactions to enhance it.
AAS
/
Article
Orbiter and rover data are showing that water may have flowed more recently on the Martian surface, maybe even into the present era.
APS
/
Article
Researchers have used radio observations of rapidly spinning neutron stars to search for signals from supermassive black hole pairs at the dawn of galaxy formation.
/
Article
A best-in-class optical microscopy probe can operate in magnetic fields up to 42 T and at temperatures as low as 1.8 K.